...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

IP-Based A/V Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when...

...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.

...Uses “Thin“ coax cable (RG58A/U or RG58C/U). • The maximum length of one segment is 185 metres. • The maximum number of segments is five. • The maximum total length of all segments is 925 metres. • The minimum distance between T-connectors is...

...of connectors. • The cable • The USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0...

...is always useful for cable management. • Rails. • A main cabinet component is one or two pairs of vertical rails with mounting holes to which you attach your equipment or shelves. The most common spacing between rails is 19 inches with hole-to-ho...

...connectors. • USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0 to support bidirect...

...by your DVD player or cable box, giving you a sharper image and truer colors. • To use the Component video built into your video devices, all you need is the right cable. A Component video cable has three color-coded BNC connections at each end. F...