For use with AlertWerks II sensor hubs as part of the AlertWerks II environmental monitoring system.
The Security Contact (Magnetic Door Contact
is an open/closed contact switch that indicates Alarm or Normal. A disconnect alarm alerts you when doors to secure areas have been opened. The contact switch can be used in a series with multiple sensors sharing a single port.
The Motion Detection Sensor
detects motion in a 60° angle within maximum distance of 3 m. Connect up to 10 motion detectors on a single sensor port.
The Airflow Sensor
provides an On/Off alarm signal for airflow. Two LEDs indicate the status of airflow and that the sensor is properly plugged into the ServSensor.
Airflow sensor
Connections Output — (1) RJ-45 M with 1.5 m cable Engine Sensor type — thermistor Measurement range — 0 — 100% Measurement rate — one reading / s Max. cable length — 30 m Management Indicators — (1) host connection, (1) status LED Size — 6.5 x 6 x 3.5 cm Power — powered by ServSensor, no external power supply required
Security sensor
Connections Output — (1) RJ-45 M with 4.5 m / 18.0 m / 30.4 m UTP cable Engine Sensor type — magnetic contact Measurement range — open / closed Measurement rate — one reading / s Max. cable length — 300 m Power — powered by ServSensor, no external power supply required
Motion detector
Connections — Output — (1) RJ-45 F; Cascade — (1) RJ-45 F Engine Sensor type — Passive Infrared (PIR) Detection speed — 0.3 — 3 Hz [b]Sensitivity — 3 m Detection angle — 60° Mounting height — 1.8 — 3 m Measurement rate — one reading / s Max. cable length — 300 m Management Indicators — (1) power, (1) alarm LED Size — 8 x 6 x 3.6 cm Operating temperature — -20 °C to 50 °C Power — powered by ServSensor, no external power supply required
Use your Intelligent Movement Sensors with these solutions:
Sign in
Contact Us
